Skip to main content

Platinum Service Group

24/7 Emergency
Service Available

7 Steps to Take Right After Water Damage Hits

water damage

A storm rolls through, and within minutes your home or business has standing water where there shouldn’t be any. The first hour after water damage happens is often the most important, and it’s also the hour when people are most likely to make mistakes, either by doing too little or by jumping into cleanup in ways that create new risks.

This guide walks through the seven steps that actually matter in those critical first hours and days, based on what we see consistently across storm and flood damage calls throughout North Texas. Whether you’re dealing with a flooded living room or a commercial space that took on water during a storm, the sequence below gives you a clear path forward.

24/7 Emergency Restoration
Water, Fire, or Storm Damage? Talk to a Specialist Now.
Our North Texas crews respond fast, work directly with your insurance, and restore your property with care. Call now for a free assessment.
Available 24/7 · Licensed & Insured · IICRC Certified

Step 1: Make Sure the Area Is Safe Before Doing Anything Else

Before you touch anything, assess whether it’s actually safe to be in the affected space. Standing water near electrical outlets, switches, or appliances creates a serious shock hazard, and floodwater from a storm can also carry contaminants from outside runoff.

If you can safely reach your electrical panel, shut off power to the affected area. If the water level is anywhere near outlets or you’re unsure, don’t risk it, stay out of the space and wait for a professional to assess it. Also check for structural concerns like sagging ceilings or warped flooring before walking through the area, especially in a commercial building where larger open spans can hide bigger structural issues.

Step 2: Stop the Water Source If You Can Do So Safely

If the water is coming from a burst pipe or supply line rather than storm runoff, locating and shutting off your main water valve can prevent the situation from getting worse while you arrange for help. For storm or flood water entering from outside, there often isn’t a source to shut off, which makes the next steps even more time-sensitive.

In commercial settings, it’s worth knowing in advance where main shutoffs are located for each unit or floor, since tracking that down during an active flood wastes valuable time.

Step 3: Document Everything Before You Move or Remove Anything

This step gets skipped more often than it should, and it’s one of the most important for a smooth insurance claim later. Before you start moving furniture, removing wet items, or cleaning anything up, take photos and video of the damage as you found it.

Capture water levels on walls and baseboards, affected furniture and flooring, and any visible source of the water if there is one. This documentation becomes the foundation of your insurance claim, and having it from the very beginning, rather than reconstructing it from memory later, makes the claims process significantly faster.

Filing an insurance claim?We document the damage and work directly with your adjuster.
📞 Call Now

Step 4: Remove Standing Water as Quickly as Possible

Once the area is safe and documented, removing standing water becomes the priority. For small amounts of clean water, a wet/dry vacuum or mop can handle the job. For anything beyond a minor spill, especially flood water that’s likely contaminated, extraction needs to happen quickly and thoroughly, which usually requires equipment beyond what most homes or businesses keep on hand.

The longer water sits, the further it travels into subflooring, drywall, and wall cavities, which is why this step is time-sensitive rather than something to handle whenever it’s convenient.

Step 5: Get a Professional Assessment Within the First Few Hours

Somewhere between removing visible standing water and starting any real cleanup, it’s worth getting a professional restoration team involved, particularly for storm or flood water, which often falls into a contamination category that requires specialized handling. A professional assessment at this stage identifies moisture that’s traveled beyond what’s visible, which matters because mold can begin developing within 24 to 48 hours of water exposure.

This is also the point where the type of water matters. Clean water from a supply line is handled differently than grey water from an appliance, which is handled differently than storm-driven black water carrying outside contaminants. Getting that assessment early prevents guesswork later.

Step 6: Begin Drying and Dehumidification

Once standing water is gone and a professional has mapped where moisture has spread, the drying phase begins. This typically involves industrial air movers and dehumidifiers placed strategically based on moisture readings, not just wherever there’s visible dampness.

For residential spaces, this phase often takes three to five days. Commercial spaces, especially those with larger open areas or multiple affected rooms, can take longer depending on the extent of the damage. Daily moisture checks during this phase confirm that materials are actually drying all the way through, not just on the surface.

Step 7: Start the Insurance Claim Process With Documentation in Hand

With the immediate danger handled and drying underway, it’s time to formally start your insurance claim using the documentation gathered back in step 3. An itemized breakdown of damaged items, combined with photos and a clear explanation of the water source, speeds up claim approval considerably.

Many restoration companies, including ours, communicate directly with insurance adjusters on your behalf, which takes the burden of translating restoration terminology off your plate during an already stressful time.

StepPriority LevelTypical Timeframe
Safety assessmentImmediateMinutes
Stop water sourceImmediateMinutes
Document damageBefore cleanup beginsMinutes to 1 hour
Remove standing waterUrgentFirst few hours
Professional assessmentUrgentWithin hours
Drying and dehumidificationOngoing3-5+ days
Insurance claim filingWithin daysDays 1-7

A Real Example of Fast Action Paying Off

A commercial property owner in Lewisville called us during a storm after water began pooling near the loading dock entrance and working its way into a storage area. The property manager had shut off power to that section of the building as soon as water was spotted near an outlet, then documented the water levels with photos before anything was moved.

By the time our team arrived about two hours later, standing water had reached roughly 600 square feet of the storage space, but because it hadn’t sat for an extended period and the manager had already photographed the full extent of the damage, extraction and moisture mapping moved quickly. Drying equipment ran for four days, and because the insurance documentation was thorough from the start, the claim was approved without the back-and-forth that often slows commercial claims down.

The property owner later noted that the only reason the damage didn’t spread further into adjacent office space was the early decision to shut off power and call for an assessment rather than waiting to see if the water would recede on its own.

When to Call for Professional Help

While the steps above give you a clear sequence to follow, certain situations call for immediate professional involvement rather than attempting to manage things alone:

  • Standing water covering a significant area, especially if it’s from storm runoff rather than a clean source
  • Water that’s reached electrical systems, HVAC components, or has been sitting for more than a few hours
  • Any musty smell or visible discoloration suggesting water has already spread into walls or flooring
  • Commercial spaces where downtime and liability make a fast, documented response especially important

Platinum Service Group is a family-owned business with more than 20 years of experience serving Dallas-Fort Worth and the surrounding North Texas area, available 24/7 for exactly these situations. Our team holds IICRC, ACAC, and NADCA certifications and works directly with insurance adjusters to keep the claims process moving while we focus on restoring your property.

Ready When You Are · 24/7
Get Your Property Back to Normal — Fast.
Speak with a restoration specialist now, or request a free on-site assessment and we’ll get back to you quickly.
Licensed & Insured · IICRC Certified

Frequently Asked Questions

How soon does mold start growing after water damage?

Mold can begin developing within 24 to 48 hours of water exposure, which is why the steps above emphasize acting quickly rather than waiting to see how things look the next day.

Can I just use fans and open windows to dry things out myself?

For a very small, clean water spill, basic drying methods can work. For anything beyond that, especially storm or flood water, fans alone won’t reach moisture that’s traveled into subflooring or wall cavities, which can lead to hidden mold growth later.

What should I photograph for my insurance claim?

Photograph water levels on walls and floors, damaged furniture or equipment, visible sources of the water if apparent, and wide shots showing the overall extent of the affected area before anything is moved or cleaned.

Is commercial water damage handled differently than residential?

The core steps are similar, but commercial properties often involve larger affected areas, more complex insurance policies, and business interruption considerations that make fast documentation and professional involvement even more important.

What if I can’t safely access my electrical panel to shut off power?

Don’t attempt to reach a panel that requires walking through standing water. Stay out of the affected area and wait for a professional or electrician to assess it safely.

Water damage rarely waits for a convenient time, but following these seven steps in order gives you the best chance of minimizing damage, speeding up your insurance claim, and getting your property back to normal as quickly as possible. If you need help right now, contact Platinum Service Group any time of day.